![]() ![]() The single document does have always exact N pages. The needed insertion command Esc)s-990Z is already added by your application, e.g. Please ask This email address is being protected from spambots. You can do that by using the #PREPARSEPAGECOUNT# variable and if the amount of pages are even, reduce the counter by one. Note: For duplex printed jobs you might need to put the mark on the second last page. The insertion mark will automatically be printed on the last page of each job. In most cases it is the last page of the letter, but sometimes, depending upon the inserter model, as well the first one. Like job splitting ELP needs the information which is the page of the document who gets the insertion mark (See technical OMR reference manual ). Sets the low-level mode with just 4 lines: Start, Insert, Parity and Stop. Include optionally the selective insertion of additional pages, see ELP technical OMR reference manual manual for detailed description.Īdds the optional safety line on request for the Kern OMR barcode. (Pitney sequence and Basic, Hefter 4200,4400) reverse the insert mark, it is set on all pages except the one which triggers the envelope insertion. For each print job the page count startup number is 0, unless the key OMR_COLLECTJOBS is not turned on. There are 5 possible entries: 2 (1 bit), 4 (2 bits), 8 (3 bits) 16 and 32 (5bits). So the next counter starts with page 0 or 1. If selected all the per queue sorted storage files with their actual sequence counters are erased. Only accessible if the sequence control is enabled, manually or by default. Sequence control is turned on and the last page number is stored and the next job starts with the next page number. ![]() Once this amount is reached the insertion command is performed. The security feature parity line can be turned on or offĭefines the maximum possible pages to be inserted into an envelope. ![]() 600 units are 2.54 cmĭepending upon the selected type of manufacturer model and the set options, the following options are selectable: More detailed information Usually 270 degrees, as the print direction is from left to right, but the barcode from top to bottom or the other way around. Same from top margin, please note if the OMR marks are read from bottom to the top this position is the position of the last visible line. Maybe set your printers to the option wide printing. Maybe set your printers to the option wide printing.įor Neopost two trail reading only: Distance in mm from the left print margin. Other modifications or machine support needed, please ask.ĭistance in mm from the left print margin. Hefter SI 4400 / SI4200: Start - Safety - NOT EOC - NOT BOC- Parity - Timing 1 Here is the listing of the supported machines or strokes: (See technical OMR reference manual ) If you need to save the sequence for each input or output paper tray of your printer please get in contact with This email address is being protected from spambots. If you use several printers then do not worry, the number is saved per queue. The last sequence number is then automatically saved. The job sequence control (paper sheet counting) can be set up for couting continuesly throughout multiple print jobs. The OMR lines position, distance, height and width can be configured freely and are by default 7.5 mm long, 0.5 mm wide and distance between each line is exact 4.32 mm.Ĭalling the OMR function via the Rule assistant leads to this menu:ĭepending on the used manufacturer / model some of the options might not be available, as either ELP can't handle it (ask for a quotation to add the function), or if it is for that machine turned on by default or the machine does not have that feature. ![]() often also support the same type of barcode printing / reading. Please note that other manufacturer like Neopost etc. Also an automatic pager numbering ensures that the inserter does not draw several piece of paper at once.ĮLP supports the following inserter brands: Stielow, Hefter, Pitney Bowes, Francotyp-Postalia, PFE and Kern. In order to make the barcode safe, a parity bit may be added. The OMR barcodes tell the inserter to collect the actual drawn piece of paper or to insert the actual plus the already collected pages into an envelope. The barcodes are used to ensure, that the documents are correct separated and feed into envelopes by folding and inserting systems. OMR barcodes are used for automatic insertion of documents into an envelope. The OMR (Optical Mark Recognition) functionality with ELP provides an easy to use, safe and fully automated way, for OMR barcode printing. For the full description of the ini file entries, please have a look into the ELP technical OMR reference manual manual. ![]()
0 Comments
Leave a Reply. |